Documentation

Alphadata 9H3 with XCVU35P

https://opencapi.github.io/oc-accel-doc/

https://github.com/OpenCAPI/oc-accel

End User Guide

This is a condensed version of what is provided in https://github.com/OpenCAPI/oc-accel. Assuming all tools are already installed, which is the case.

Compiling a bitfile on hal-fpga-x86

ssh into hal-fhga-x86 with -X to enable X forwarding. This also implies your client can receive X forwarding. 

source /opt/xilinx/Vitis/2019.2/settings64.sh
git clone https://github.com/OpenCAPI/ocse.git
git clone https://github.com/OpenCAPI/oc-accel.git
cd oc-accel
make snap_config  ## this uses an opensource Kconfig menu

When a SNAP Config GUI shows up, select 3 items:

1.  Card Type   (OpenCAPI3.0: AlphaData 9H3-35 (incl. VU35P with HBM) (under development))
2. Action Type (HLS HelloWorld 1024b   (Action to Host I/F =1024b))
3.  (~/ocse) OCSE_ROOT: Path to OpenCAPI Simulation Engine Root

Do not forget to save the configuration into config file and then exit. 

Check file snap_env.sh script to make sure it has "export OCSE_ROOT=~/ocse".

make sim     ## (or make sim_tmux if no xterm available)
# in the terminal that appears, run
echo "Hello world_1024. This is my first CAPI SNAP experience. It's real fun." > /tmp/t1
snap_helloworld_1024 -i /tmp/t1 -o /tmp/t2
cat /tmp/t2

You should see "HELLO WORLD_1024. THIS IS MY FIRST CAPI SNAP EXPERIENCE. IT'S REAL FUN."

This concludes the software simulation test.

To compile bitfile for FPGA

cd ~/oc-accel
make image

This will take an hour+ and eventually will produce an image in ~/oc-accel/hardware/build/Images/. Copy this image to the corresponding location on hal-fpga server, if the location already exists (see next section).

# scp ~/oc-accel/hardware/build/Images/F <userid>@hal-fpga.ncsa.illinois.edu:~/oc-accel/hardware/build/Images/.

Executing on hal-fpga

ssh into hal-fpga.

git clone https://github.com/OpenCAPI/oc-accel.git
cd oc-accel

At this point, scp compiled image from hal-fpga-x86:

mkdir -p hardware/build/Images
scp <userid>@hal-fpga-x86.ncsa.illinois.edu:~/oc-accel/hardware/build/Images/* ~/oc-accel/hardware/build/Images/.
make clean all

And finally load bitfile and run the example:

# check the exact name of the bitfile, e.g., 
sudo oc-flash-script hardware/build/Images/oc_2023_0202_1645_25G_hls_helloworld_1024_noSDRAM_OC-AD9H335_1.bin

./actions/hls_helloworld_1024/tests/hw_test.sh