Ratio: 1TB Quota to 1,500,000 iNodes
An inode is a record that describes a file, directory, or link. This information is stored in a dedicated flash pool on Taiga and is of a finite capacity. To ensure that the inode pool does not run out of space before the capacity pools, this quota ratio is implemented. So for example if your project has a 10TB quota on Taiga, it will also have a quota of 7.50 million inodes. If you have any questions about this ratio please contact the storage team by opening a support ticket.
File System Block Size: 2MB
For a balance of throughput performance and file space efficiency, a block size of 2MB has been chosen for the Taiga file system. Larger file sizes help larger streaming data movement go faster, in general doing large I/O to file systems is encouraged if possible.
Stripe Size: 1
Number of Flash OSTs in Taiga: 24
Number of HDD OSTs in Taiga: 28
Lustre is capable of striping data over multiple OSTs to increase performance and help balance data across the disks. The default stripe for Taiga is set to 1 but this value is overridden as the file being written gets larger and larger; this behavior is determined by the PFL configured for Taiga which is described in the next section. If a user wants to see how many OSTs a file is striped across they can run the below command; the example shows a file that is striped across 2 OSTs.
user@client# lfs getstripe -y /taiga/nsf/delta/abc123/testfile lmm_stripe_count: 2 lmm_stripe_size: 4194304 lmm_pattern: raid0 lmm_layout_gen: 0 lmm_stripe_offset: 3 lmm_objects: - l_ost_idx: 0 l_fid: 0x100000000:0x2:0x0 - l_ost_idx: 1 l_fid: 0x100010000:0x2:0x0
Taiga deploys a Progressive File Layout (PFL) that performs a couple key functions.
First, it allows us to keep the initial 64KB of every file on NVME flash; this increases performance for small file I/O by keeping it on faster media and keeps that noisy traffic off the spinning media that prefer larger I/O patterns. This helps improve the throughput for workloads doing large I/O by letting them have clearer access to the HDDs that make up the bulk of Taiga's capacity.
Second, it allows us to dynamically set the stripe size of files so that the bigger a file grows the more stripes it gets. This helps improve the performance of the system, and helps keep the OST usage rates more balanced which leads to overall better system responsiveness. The stripe count of a file can be overridden by using either "lfs setstripe" or by using "lfs migrate" to change an existing file's stripe count; however these actions are very much discouraged. Users should use the system defaults except in rare cases.
PFL Implementation Details:
NVME Capture Size: 64KB
Stripe for Files 0 bytes to 256MB: 1
Stripe for Files 256MB to 4GB: 4
Stripe for Files 4GB and Above: All HDD (Currently 28)
Taiga is available via a native Lustre mount on the below systems:
Native sub-directory mounts can also be requested for one-off machines via an SVC ticket, with the STO: Taiga component. SET will be providing a streamlined guide for Lustre client installation and configuration here (link coming soon). Requests for one-off mounts of Taiga will only be allowed for machines that have gone through the NCSA security hardening process.
Taiga is accessible via Globus at the endpoint name "NCSA Taiga" and the endpoint is open to the public internet for transfers from anywhere with another Globus endpoint. Authentication to the endpoint is handled by NCSA's CILogon service and requires two-factor via Duo. For shared collections, or other questions submit a ticket to email@example.com. Information about Globus can be found at their site https://www.globus.org
Native mounts of Taiga using the Lustre client are greatly preferred for superior performance and increased stability, however sub-directories of Taiga can be mounted via NFS in cases where that is necessary. The NFS service is accessed via the HA taiga-nfs.ncsa.illinois.edu endpoint. The NFS endpoint is currently comprised of 4 servers that are directly connected to the 100GbE public-facing storage network and via redundant links to Taiga's HDR Infiniband core fabric. If you need an NFS export please file a ticket with the STO: Taiga component flag and the storage team will assist in getting the exported provisioned.
Snapshots are run on Taiga once per day, and are retained for a 14 day period. The creation of new and removal of old snapshots is run automatically without intervention, it is not possible to recover deleted data from more than 14 days prior. Users wishing to recover data from snapshots should open a ticket with the storage team.
In general snapshots are designed to protect against and are useful for:
Snapshots are not designed to protect against:
Snapshots are also not designed to act as version control for software; all code changes should be kept in a git repository or similar version control tool.
Data on Taiga is not backed up; and is only a single copy. It is recommended to back up critical data to an allocation on the Granite tape archive system or on another system on which you have an allocation.
For VM attached storage, we recommend utilizing the Radiant openstack service. This is a separate service but will allow projects to have VMs to be able to handle their data pipeline/other requirements